Side suction or top suction of range hood misunder

2022-07-22
  • Detail

When purchasing range hoods, you will always face such a choice. Is it better to smoke the range hoods on the side or on the top? Top suction range hood is a more traditional style, while side suction range hood is a new product in recent years, and the price is much more expensive than top suction range hood

when purchasing range hoods, you will always face such a choice. Is it better to smoke the range hoods on the side or on the top? Top suction range hood is a more traditional style, while side suction range hood is a new product in recent years, and the price is much more expensive than top suction range hood. Next, the editor will introduce the side suction or top suction of the range hood and the misunderstanding of the selection of the range hood

side or top suction of the range hood

1. Advantages of the side range hood

a, no dripping and no bumping

because the side suction range hood adopts the inclined design, the side suction range hood will not encounter bumping and dripping

b, good oil extraction effect

because the side suction range hood is very close to the stove, it can lock the oil smoke at the first time, and it adopts air inlet from the side without smoking flames, which will not waste gas

c, it can realize the separation of lampblack,

the side suction lampblack machine adopts the lampblack separation panel, which can separate the lampblack, and the oil stain will not enter the inner cavity of the lampblack machine, so it can realize the non disassembly and cleaning of the inner cavity, but the lampblack panel needs to be cleaned

2. Advantages of top range hood

a. good smoke exhaust effect

direct suction (top suction) range hood has relatively mature technology, good smoke exhaust effect, and relatively low price

b, many styles, atmosphere and fashion

direct suction range hood has various designs, generally large volume, strong texture, and can be integrated with other kitchen appliances

mistakes in the purchase of range hoods

1. The greater the power, the better the smoke effect will be.

promoters often use power to make an article, saying that the greater the power, the better the smoke effect will be. This is a big mistake. In fact, there is no inevitable connection between power and the effect of lampblack. If a lampblack machine only has high power, but the turbine is rough, the motor manufacturing is not qualified, and the manufacturing quality of the inner cavity is also very poor, it is often just dry power consumption, but it can not achieve good results

2. The material of the panel is irrelevant

about the panel material, the promoter may “ Deliberately forget ” Do not mention, or directly say a certain alloy term to deceive consumers. In fact, the material of the range hood is very important. Imagine that a range hood is exposed to the corrosion of various acids and bases such as lampblack and seasoning every day, which may not be seen in the short term, but problems such as fading and oil leakage smoke will occur half a year or a year later. In fact, it is also very simple to check the material. The best material in China is generally imported m-cr fine steel, which looks fine and has texture. This material is oxidation-resistant, corrosion-resistant and will be polished more and more brightly. To distinguish this material from general alloy materials, you only need to use magnets directly to try. If you can absorb it, it must be general inferior alloy or iron, and if you can't absorb it, it is refined steel

3. The design of the inner cavity is not important

the importance of the design of the inner cavity of the range hood can not be ignored. On the one hand, it is necessary to be seamless and easy to clean as much as possible, and at the same time, it is also necessary to protect the lines, so that all kinds of lines can work normally under the strong corrosive conditions of oil smoke and will not be corroded. The seamless design in the inner cavity is not only seamless in the cavity, but also the small surface parallel to the stove can be seamless. At the same time, it is also necessary to achieve “ Invisible seamless ”, For example, oil proof walls should be set, so that there is really no dead corner left for cleaning

4. With the function of no disassembly and cleaning, there is no disassembly and cleaning

it is impossible for the range hood to be absolutely free of disassembly and cleaning. After a range hood has been used for a year, it must be disassembled and cleaned, otherwise the effect of the range hood will be seriously affected due to the attachment of the turbine and the inner chamber lampblack. Therefore, a range hood cannot be unlimited “ No disassembly and cleaning ”, Instead, it should be designed as “ Removable and washable ”, After a year, you can dismantle the oil net and clean the turbine at home, which is really easy to clean

editor's summary: This is about the side suction or top suction of the range hood and the misunderstanding of the selection of the range hood. I hope it will be helpful to you. You can pay attention to information if you want to know more about it

重庆妇产医院

广州男科医院

北京精神医院

Copyright © 2011 JIN SHI